jv2dmk(1) jv2dmk(1) Name jv2dmk - Convert a JV1 or JV3 floppy disk image file to DMK format Syntax jv2dmk [options] filename.dsk [filename.dmk] Description The jv2dmk program converts a floppy disk image in the JV1 or JV3 for- mat to the DMK format. All of these formats were originally developed for TRS-80 Model I/III/4/4P emulators, though the DMK format is useful more broadly. For more information about the DMK and JV3 file formats and the emula- tors that use them, see: http://discover-net.net/~dmkeil/ http://www.tim-mann.org/xtrs.html Options If only filename.dsk is given on the command line, filename.dmk is formed by deleting any extension from filename.dsk and appending ".dmk". -v verbosity Specify how much output is printed. Larger numbers select more output. The default setting is 0. 0 No output. 1 Print a line for each track, listing the sector numbers found. 2 Print a line of data about each sector. -j which Specify whether the input disk image is JV1 (-j1) or JV3 (-j3). The default is 3. -k kind Specify the type of media in use. The default is 1. Possible values: 1 5.25-inch or 3.5-inch SD/DD disk 2 Same as 1; accepted for compatibility with cw2dmk. 3 5.25-inch HD disk or 8-inch SD/DD disk 4 3.5-inch HD disk -i iamark If this option is set to 1, jv2dmk writes an IBM gap0 and index address mark at the start of each track. If the option is set to 0 (the default), jv2dmk uses an ISO format with no gap0 or index address mark. With very tightly-packed formats, setting the -i1 option could cause a track to be too long to fit on the disk. -w fmtimes Normally, FM bytes are written into the DMK file twice (-w2), so that they take up the correct proportion of the space on mixed- density tracks. You can set -w1 to cause FM bytes to be written only once. This does not save space in the DMK file unless you also reduce the track length with the -l option. -l bytes DMK track length in bytes, overriding the default setting estab- lished by the -k option. This option is not effective unless given after the -k option. Limitations It would be nice if jv2dmk could guess the right value for the -k flag. Although the JV3 format doesn't record this value, one could probably do a good job of guessing by using the smallest -k for which the JV3's track 0 data fits. A JV1 image is always -k1. In rare cases a JV3 can be unrepresentable in DMK format. This happens if the JV3 has too much data or too many sectors on one track. A real copy-protected disk can be written with sectors that overlap, making it appear when the disk is converted to JV3 that there is more data on the track than is physically possible, and/or that there are more sectors on the track than the DMK limit of 64. On extremely tightly-packed formats (unlikely to occur in practice), jv2dmk's gap computation might fail to produce usable results. It might complain that the track is too long when a clever human could have made it fit, or worse, it might make gap3 (the gap immediately after a sector's data and CRC) too small to allow for safely overwrit- ing a sector later. If gap3 is too small, overwriting one sector can destroy the sector ID of the next sector. jv2dmk does not support the xtrs-only "non-IBM" extension to JV3 for- mat. Diagnostics jv2dmk: Too many sectors per track (n) The DMK format has a limit of 64 sectors per track. jv2dmk: Physical track too long by n bytes The JV3 file had too much data on the track to fit on the speci- fied kind of disk. You may have used the wrong value for the -k flag, or jv2dmk may not have been clever enough to work out how to fit the track; see Limitations above. jv2dmk: DMK track too long by n bytes This error should occur only if you gave the -l flag with too small a value. Authors jv2dmk was written by Timothy Mann, http://tim-mann.org/. jv2dmk is free software, released under the GNU General Public License. Thanks to David Keil for designing and documenting the DMK file format for floppy disk images, and to Jeff Vavasour for designing and documenting the JV3 format. $Id: jv2dmk.man,v 1.5 2005/03/29 07:13:40 mann Exp $ jv2dmk(1)